KNX SMS gate

A device for remote monitoring and control
of KNX devices by sending and receiving information messages via SMS channel.

€ 420

BUY

A device for remote monitoring and control of KNX devices by sending and receiving information messages via SMS channel.
• Sending and receiving messages to specified phone numbers (up to 10 numbers)
• Sending a message about a power failure in the KNX bus
• Periodic monitoring of the balance on the SIM card.
• Up to 50 types of outgoing information messages
• Up to 20 types of incoming SMS for device management – temperature setting, load on/off, etc.
• The ability to transmit a single numeric parameter (for example, temperature) in the template body
• Storing message templates and phone numbers in an end-user-friendly format on an SD card.
• Saving unsent messages in case they cannot be sent, and sending them after resuming communication.
• Sending real-time telegrams to the bus (according to GSM network data)
• The ability to connect an external GSM antenna

Device model SMS-K2050-1
Universal channels  

Frequency of sending messages when powered by the KNX bus

/min
KNX Interface  
Specification TP-256
Configuration Program ETS 5/6
Connection

Connector WAGO 234-211

Device power supply Bus KNX
KNX bus consumption (29 V DC) <12mA
Operating temperature range от 0 до +45°C
Humidity during operation от 5 до 95% (non-condensing)
Degree of protection of the housing IP20, in a clean environment
Flammability class (1,5 mm) UL94 V0
Type of installation on a DIN rail (EN 50022) in an electric cabinet
Size 37x91x61mm (37x107x61 with external antenna)
Weight г