Universal module of 8 inputs/outputs, in a housing for mounting on a DIN rail.

Description
Specification
Files

A module of binary inputs/outputs, inputs for temperature, humidity or light sensors in a housing for installation in a shield on a DIN rail. The module size is 2DIN (37mm).

Up to 8 binary inputs
Short/long press, dimming, Curtain control
Switch mode
Pulse counter
Activating scenes
Curtain management
Up to 8 LED outputs
Up to 8 SSR control outputs for the heating valve relay
Up to 8 NTC temperature sensors
Up to 8 digital sensors for temperature, humidity, and light
8 thermostats
20 logic modules with a choice of one of 31 functions for each
Powered by the KNX bus

Article number	BIN-K0800-1
General parameters
The device is powered	by the KNX bus
Number of inputs	Up to 8
Number of outputs (for LED up to 2mA each)	Up to 8
Maximum length of the NTC temperature sensor cable to be connected	30m
Maximum length of the connected digital sensor cable	100m
The cross-section of the connected wire	Up to 1mm²
Operating temperature range	from 0 to + 45°C
Humidity during operation	from 5 to 95% (non-condensing)
Degree of protection of the housing	IP 20, in a clean environment
DIN rail mounting type	(EN50022) in an electrical cabinet
Size	37х91х61mm
Weight	85g
Material	ABS UL94V0
The KNX interface
Specification	TP-256
Configuration program	ETS 5.7 and higher
Connection	Standard EIB Connector (WAGO 243-211)
KNX bus consumption (29V DC)	< 5 mA , < 150 mW
Accessories
NTC temperature sensor (thin cable), 1m	NTC-S0101-1
NTC temperature sensor, 3m cable	NTC-S0102-1
Датчик температуры NTC, гильза 5*30мм , кабель 3м	NTC-S0103-1
NTC temperature sensor, sleeve 530mm , 3m cable NTC-S0103-1 Digital temperature sensor, sleeve 530mm, 3m cable	OWR-S0101-1

Device description : Datasheet-BIN-K0800-1-RU

Application program ETS5/6 ver 1.6 EN/RUS download

Application program ETS5/6 ver 1.7 EN/RUS download

Elements set Visio download